Portable Electrical Tools
· Before using a portable electrical tool check to see it is properly earthed, unless it is an approved type that does not require earthling.
· Before using an electrical tool, make sure that the casing is undamaged, if it is damaged, do not use the tool.
· Make sure that all cables, plugs or connector are sound and properly wired up.
· Use tools only on the correct power supply as instructed on the marker’s label.
· Make sure that the power cable is long enough to reach your working place without straining it.
· Keep power cables off the floor. They may get damaged or trip somebody.
· Never stand on a damp or wet surface when using electrical equipment and keep it clean and dry.
· Portable electrical tools should only be used for their designed purpose.
· Never connect a portable electrical tool to a lighting socket.
· Never use worn, blunt or damaged bits or other accessories.
· Disconnect tools when not in use.
· Electrical power tools should be regularly inspected and maintained by a competent electrician.
· Don’t use equipment with the inner insulation of cable visible at the plug.
· Don’t pick up electrical equipment by its power lead
· Don’t attempt electrical repairs unless authorized to do so by your manager and suitable trained.
· If in doubt contact your line manager.
- يجب التأكد من ان جميع وصلات الادوات الكهربائية أمنة وذلك قبل استخدامها
- يجب عدم استخدام الادوات الكهربائية اذا وجد بها اية عيب يؤدى الى خطورة على الحياة.
- يجب التأكد من ان جميع الاسلاك والوصلات قد تم تمديدها بطريقة سليمة
- يجب دائما استخدام الاداة الكهربائية بما يتناسب مع الجهد الكهربائى لها والموضح على الاداة.
- يجب التأكد من ان التمديدات الكهربائية ذات اطوال مناسبة من مصدر الكهرباء للوصول الى مكان العمل دون اية اجهاد.
- يجب عدم وضع التمديدات الكهربائية فى الممرات مما قد يتسبب فى اتلافها او تعثر أحد الاشخاص.
- يجب دائما تجنب الوقوف على سطح رطب او مبلل اثناء استعمال الاداة الكهربائية والحفاظ عليها فى حالة جيدة وجافة.
- يجب استعمال الاداة الكهربائية فقط فى الغرض الذى صممت لاجلة.
- يجب دائما تجنب توصيل الاداة الكهربائية بمقبس الاضاءة.
- يجب عدم استعمال اى اداة بها عيب او اتلاف.
- يجب فصل الاداة عن التيار الكهربائى فى حالة عدم استخدامها.
- يجب دائما التفتيش الدوري على الادوات الكهربائية بواسطة الفنى المختص.
- يجب عدم استعمال الاداة الكهربائية اذا وجد بها اية توصيلات اضافية.
- يجب عدم القيام باية اصلاحات للاداة الا من قبل الفنى المختص.
- في حالة العثور على احد الادوات الكهربائية المتضررة بادر بابلاغ مديرك .